From cotton dredging process to sliver,rove, spun yarn and wind, megmeet provide customs the perfect application system solutions.with its universal drive, servo drive systems, the strong product line and expert team of industry.
The maximum root of cotton troubled knot is that there are a lot of cotton flying willow fuzz spinning workshop, flying willow fuzz will tangle drive’s cooling fan after a long time ,causing the drive to lose cooling capacity, resulting in frequent temperature alarms until the drive is damaged. In addition, cotton workshop ambient temperature is relatively high, we assume that the workshop temperature of 40 ° C, cabinet temperature of 50 ° C, the heating element inside the drive even higher, will easily exceed 85 ° C. Therefore, the drive for cotton need to be addressed thermal issues for periphery of drive from the application level, the drive solve the problem of internal heating and cooling from the design level. So Megmeet specially developed MV300B and MV600B series cotton dedicated drive,puts forward the corresponding solutions.
Part of textile machinery is being upgraded to a multi-motor drives from a single motor drive, the original belt and gear drive was quickly replaced by electronic gear between each drive systems, reduce maintenance and improve the flexible manufacturing ability of equipment, such as roving machine. In order to increase the degree of automation, reduce proportion of man and machine, the process artificial completed previously gradual automatically done by machinery, such as colony in ring spinning process. Electronic gear, power stably stop, homing and multiple positioning of SVM series servo drive is developed for these needs.
For new weaving equipment, we provide high-power direct-drive systems and switched reluctance motor drive system.
With the improvement in the level of factory automation, as the bottom of the drive actuator, its own state and information up to the plant office systems through a variety of Internet connection, and we provide MODBUS, PROFIBUS, CAN, CANOPEN and other fieldbus interface.
From singeing, mercerized to printing and stereotypes and other mechanical equipment, megmeet provide customs the perfect application system solutions with its general purpose drive, servo drive systems, the strong product line and expert team of industry.
A full range of drive products of Megmeet provide through-the-wall installation mode, all the circuit boards are rigorously " three proofings " processing, so in response to printing and dyeing industry and other harsh external environment with ease. In the printing industry, there are a lot of fan and pump loads, MV300P proprietary power saving mode, make sure that such motor of the square of the load which meet the process requirements always working in the operating state of energy saving , it saves 1 -2 points energy compare with conventional drive.
SVM series servo drives provide precise speed control, position control. for printing machinery, high-end stenter stereotypes equipment.
Chemical fiber equipment
From filament to staple fiber and profiled fiber, from polyester to spandex and acrylic, megmeet drive is widely used in a variety of fiber weaving and processing equipment.
MV series drive has the following characteristics:
Support DC power supply, wide voltage range from 450V ~ 750V
Unique Instantaneous stop non-stop (grid Instantaneous stop, drive non-stop) function, response to abnormal fluctuations in the power grid, improve production stability
Unique lightning protection circuit design, reduce the failure rate of lightning impact, improve production stability
Wide jump speed range, high accuracy, and ensure the quality of silk
MV300B: MV300B is a special drive which specially developed for occasions which has a lot of cotton and other fibers, flying willow fuzz, etc. In these cases it is easy to tangle fan, making it stall and damage, resulting heat dissipation problem. MV300B through professional structure design, easy to implement installation requirements of IP54, and solves the problem of heat dissipation inside the drive. MV300B has been widely used in spinning, roving machine and other textile equipment.
MV600B: MV600B is a special occasion drive which specially developed for cotton and other fibers, flying willow fuzz, etc. In these cases it is easy to tangle fan, causing it to stall and damage, resulting Heat dissipation problem. MV600B through professional structure design, easy installation requirements of IP54, and solves the problem of heat inside the drive. MV600B been widely used in spinning,colony in ring spinning and printing equipment.
MV300 series vector control general drive is widely used in general-purpose machinery and equipment and energy saving projects. Its excellent open-loop vector control function, complete various bus adapter cards, make that MV300 series can be applied to single-and multi-drive transmission system.